How to Cut French Fries with a Food Processor: 4 simple steps

It is no secret that people love french fries. The crispy, salty goodness of potato cut to perfection and fried until it is golden brown has been the subject of many food fantasies (and cravings) for years. However, how do you make them? You can use a knife if you are skilled in cutting vegetables- but if not, why not try using your trusty food processor!

It is important to use a food processor with sharp blades for this task.

How to Cut French Fries with a Food Processor
How to Cut French Fries with a Food Processor?

The first step is to peel the potato and cut it into long, thin strips.

Next, you will need to partially submerge these strips in water so they are not too dry when put through the slicer blade on your appliance of choice. Slicing them lengthwise can be easier than cutting them down the center- but either way works just fine as long as you have a few slices that are about one centimeter wide or smaller.

Last update on September 22, 2021 / Affiliate links / Images from Amazon Product Advertising API

Next, you will need to place the fries in a bowl and dry them off with paper towels. You don’t want too much water on these babies or they’ll turn into a mushy mess!

Then, all that’s left is for you to layout your french fry slices onto an oiled panhow easy was that?

The food processor will take care of making the perfect length while you sit back and enjoy how easy it is to make this classic dish.

Can You Make French Fries with a Cuisinart Food Processor?

The answer to this question is both yes and no.

Last update on September 22, 2021 / Affiliate links / Images from Amazon Product Advertising API

Yes, but not using the blade that comes with it. The blades on these processors are designed for chopping vegetables or grinding breadcrumbs, and as such will produce an uneven cut of potatoes, which can lead to burnt or undercooked pieces in your fryer.

If you want to use a Cuisinart food processor for making French fries, then you must buy an additional slicing disc attachment at the same time (it typically costs around $10) that will allow you to slice the potatoes into a uniform size.

Step-by-Step Guide on How to Chop Potatoes in a Cuisinart Food Processor

There are many different ways to chop potatoes in a Cuisinart food processor, but this article will go over the most popular way that is used by professionals and home cooks alike.

You will need a few items before you start:

  • A large bowl
  • Water
  • Two tablespoons of butter or margarine
  • One tablespoon of salt (or more if desired)
  • About 3-4 pounds of potatoes

First off, slice your potatoes into thin slices with the thickness set at 1/8 inch or less.

Then place them all in the mixing bowl (you can do this while they are still wet).

Add some water until it reaches one-quart capacity and then adds your melted butter or margarine to make sure everything is well mixed together.

Place the blades of the Cuisinart food processor in and turn it on.

The first thing you should do is add some salt to the taste (remember that this will not be flavorless).

You can also experiment with other seasonings like garlic or onion powder instead if you want a little more kick!

After adding all your desired spices, start blending until the potatoes are chopped into small pieces.

Last update on September 23, 2021 / Affiliate links / Images from Amazon Product Advertising API

Cuisinart Food Processor: French Fry Cut Disc

The Cuisinart Food Processor French Fry Cut Disc is the perfect tool for cutting fries and making them crispy. This Cuisinart Food Processor accessory is made of durable, dishwasher-safe stainless steel with a protective coating that prevents scratches from forming on the surface.

The Cuisinart Food Processor French Fry Cut Disc will be a great addition to your kitchen!

Cuisinart Food Processor French Fry Cut Disc
Cuisinart Food Processor: French Fry Cut Disc

Cuisinart French Fry Cutter: Quick Cooking Solutions

The Cuisinart French Fry Cutter is one of the top-rated kitchen gadgets for 2021. Cuisinart has been in business since 1973 and they are a leader in home cooking appliances with more than 2,000 products available worldwide.

This company knows what its customers want and this fry cutter is no exception. It’s perfect for those who need to cook fast and easy or store excess fries after cutting them up!

How to Make French Fries Using a KitchenAid Food Processor?

Do you want to make french fries but don’t have a deep fryer?

Last update on September 22, 2021 / Affiliate links / Images from Amazon Product Advertising API

The answer is yes! You can make french fries with a Kitchenaid food processor. To do this, you will need:

French Fry Recipe:

Step One: Peel and slice your potatoes into long strips. If you are using a mandoline slicer, set the blade to about one inch in width. Make sure that when you cut them each strip is at least as wide as the blades on your food processor because it will be easier than cutting off large chunks after they have been mixed with other ingredients.

Step Two: Add some canola oil to your blender or another type of food processor (enough so there’s just enough room for the fries), then add salt and pepper until its flavor becomes desired. Place sliced potatoes inside blender or mixer bowl and blend together until all pieces are evenly coated with potato mixture from step two. You may need to add more or less oil at a time depending on the size of your potatoes, but you want it so that all pieces are fully covered in liquid and there isn’t any air left.

Step Three: Place the deep pot onto the stovetop with high heat settings (enough to fry french fries). Add enough canola oil about three inches up from the bottom of the pan. As soon as the cooking thermometer reaches 350 degrees F, carefully drop raw potato strips into a hot frying medium for approximately two minutes until the golden browned color is achieved.

Step Four: Transfer fried potatoes from cookware into paper-towel-lined bowls or plates and season with salt and pepper immediately after removing them. Repeat the process until the desired amount has been created!

Can you make French Fries with a KitchenAid Food Processor?

You sure can!

Is There a Kitchenaid Attachment for French Fries?

What do you want to serve with your delicious burgers this summer? Is it french fries?

Last update on September 23, 2021 / Affiliate links / Images from Amazon Product Advertising API

You might be surprised that there is a Kitchenaid attachment for French fries. In fact, they even have two different ones!

The first one is the food processer and the second is called a slicer and dicer kit.

The blade on these attachments is made of durable stainless steel which means they will last longer than other blades. They are also dishwasher safe so clean up will be easy as well!

This is perfect for those of us who love french fries and want to enjoy them with a burger this summer.

French Fries With Breville Food Processor

French fries are one of the most popular side dishes in America, and Breville offers a food processor that can make them easier than ever.

Last update on September 23, 2021 / Affiliate links / Images from Amazon Product Advertising API

  • Cutting french fries with the Breville food processor is as easy as plugging it in and pressing start!
  • The blades are sharp, so you get a perfect cut every time.
  • It comes with a grater that can be used for cheese, too. Try an Italian dish by shredding Parmesan on top of your potatoes or use smoked Gouda to make crispy wedges as they sell at fairs. If you’re looking for something more low-key, try using finely minced garlic instead. Add thyme if you want to go all out!
  • You have three thickness settings: thin (for shoestring fries), medium (for regular cuts), and thick (for steak fries). This is the perfect food processor for making all three types of fries, so you don’t have to run out and buy a new machine if your family prefers one type over another.

Can a Food Processor Cut Potatoes?

Can a food processor cut potatoes? Can it really?

If you’re asking this question, then you are not alone. We all want the answer to that question so that we can decide what kitchen tool to buy next. I’m here today to tell you everything about whether or not a food processor can cut potatoes and other vegetables too!

It’s no secret that there is an overwhelming number of appliances on the market these days, but which ones do exactly what they say they will do? Can a food processor really slice up some veggies as well as grind nuts into powder for your favorite vegan cookie recipe?

Can a Food Processor Cut Potatoes
Can a Food Processor Cut Potatoes?

Yes! Let me give you the low-down now.

The majority of models out there have two different blades: one with a serrated edge and one with a straight blade. Can you guess what those blades are for?

The serrated edge is used to cut up all sorts of vegetables such as potatoes, apples, carrots, etc., while the other is great for grinding nuts or whole spices into powder.

In order to use it properly though, make sure that you switch between the two blades! This will ensure even cutting on both ends which means they’ll be equal in size once finished.

Last update on September 23, 2021 / Affiliate links / Images from Amazon Product Advertising API

Can You Slice Sweet Potatoes in a Food Processor?

Yes, you can slice sweet potatoes in a food processor! You will need to peel the potato first and then cut it into pieces. Next, process each piece of potato separately until they are all finely sliced.

Can You Use A Food Processor To Slice Potatoes?

The answer is YES! You can use a food processor to slice potatoes. A lot of people see the word “food” and automatically think that it means you cannot do anything but the process/chop something in there. But they are wrong because most processors come with two blades, one for chopping and one for slicing.

How to Chop Vegetables in a Food Processor?

A food processor is a great way to chop vegetables. It takes the hassle out of chopping by giving you quick, even results.

How do you chop vegetables in a food processor?

How to Chop Vegetables in a Food Processor
How to Chop Vegetables in a Food Processor

Follow these steps:

  • Wash the vegetables off and cut them into uniform pieces.
  • Put a small amount of water in the bottom of the bowl – you want just enough to cover half of your vegetables.
  • Add some salt, pepper, or other seasonings if desired. This is for taste only; it won’t affect how they turn out when processed.
  • Put all of your chopped veggies from each type together at one time (don’t mix different types) in order to get an even chop on everything that’s going in there with no waste due to over-processing too much here and not enough there. The food processor does this quickly and efficiently for you!

Can I chop onions in a food processor?

You can easily chop onions in a food processor.

All you need to do is peel the onion, put it into your food processor, and press power for about 15-20 seconds until they are minced finely. Details…

You will also notice that there was not any odor coming off of the onion while chopping them which would be another benefit for using a food processor instead of just cutting with an actual knife.

Can You Make Chips in a Food Processor?

Yes, you can! A lot of people think that you need a fryer for chips, but this is not true.

To make chips in a food processor, all you need to do is cut potatoes into thin slices and lay them out on an aluminum foil-lined baking sheet. Then place the baking sheet into the oven at 400 degrees Fahrenheit for 15 minutes or until they are crispy and browned. After that, remove from the oven and serve with your favorite dip or sauce!

How do you Shred Potatoes with a Food Processor?

Well, the answer is actually quite simple. All you need to do is gather your ingredients and follow these 5 easy steps:

How do you Shred Potatoes with a Food Processor
How do you Shred Potatoes with a Food Processor?
  • First, peel and wash your potatoes.
  • Next, cut them into cubes.
  • Put the cubed potatoes in a bowl or pot of water – Leave for 8 minutes before draining off the water.
  • Drain any remaining liquid from the bowl using a colander or slotted spoon.
  • Finally, put it back onto the cutting board and run through your food processor is as simple as that!

**How to Grate Potatoes in a Food Processor in 8 Easy steps!

How to Cut French Fries with a Mandoline?

I know it sounds crazy, but yes, you can use a mandoline slicer to cut French fries. In fact, I have used my mandoline to make all sorts of vegetable and fruit cuts for cooking and garnishes – from julienne zucchini slices to paper-thin apple chips!

Can you imagine how cool it would be if your kids could do the same thing?

The first thing you’ll want to do is peel and wash the potatoes. I like to use a vegetable brush for this job – it gives me more control than just scrubbing with my hands, but if you prefer not to have any extra pieces of bristles in your food (or on your cutting board), feel free to skip that step!

Next, trim off both ends so they’re flat across the bottom surface. You can leave them long or cut them shorter based on what’s easier for you when using the mandolin slicer.

French fries are traditionally round-ish shaped, so make sure that one end has a rounded edge as well before slicing into thin slices about an inch wide or less). Once sliced, fry up your French fries and fry up some more – the perfect dipping sauce for a lazy summer evening!

Last update on September 22, 2021 / Affiliate links / Images from Amazon Product Advertising API

Why is it called a mandoline slicer?

The name mandoline slicer is derived from the French word “mandoline”, which translates to mean a musical instrument. The small, hand-held mandolin has similar qualities to the modern-day slicer.

Which Knife Cut is Best for Homemade French Fries?

It seems like a simple question, but there are many answers.

Which knife cut is best for homemade French fries? That depends on what you want to do with your fries. Different types of cuts will give the cooked fry different textures and shapes.

Which Knife Cut is Best for Homemade French Fries
Which Knife Cut is Best for Homemade French Fries?

Different Knife Cuts for Homemade French Fries:

  • Waffle Cut – The potatoes are cut with a round knife into waffle shapes. This type of cut helps the inside of the fry darken evenly while giving it a crispy outside.
  • Matchstick Cut – These fries look like matchsticks from your favorite fried chicken joint and can be cooked in as little as two or three minutes. They will have an uneven texture and flavor because they’re so thin, but that’s what some people prefer!
  • Crinkle Cut – When these cuts first came out to restaurants, customers would say “I want my fries crinkled!” That is why this style has stuck around. Thin strips are obtained when potatoes are cut with a crinkle cutter.
  • Straight Cut – This type of fry is the most common to see on any McDonald’s menu, but it also has its own pros and cons. They cook more evenly because they’re all about the same thickness, so you don’t have to worry about them getting burned before some fries get tender in the middle!
  • Wedge Cut – These potatoes are cut into wedges that will be thick at one end and thin at another when cooked. The thicker side tends to stay crunchy while the thinner part gets soft as it cooks through.

Last update on September 23, 2021 / Affiliate links / Images from Amazon Product Advertising API

How to Cut Potatoes into 1/4 Inch Cubes?

This question has been asked by many people, and luckily for you, I have the answer! Here is a step-by-step guide on how to cut potatoes into 1/4 inch cubes.

1) Peel the potato using a vegetable peeler or sharp knife.

2) Cut the peeled potato in half lengthwise down its center so that each half will be about one-fourth of an inch thick.

3) Slice both halves horizontally through their centers to create four equal pieces. Put these pieces together at right angles to create eight even sticks of approximately 1/4″ thickness each.

Top 5 Food Processors for French fries

French fries are a favorite staple food for many people. Whether you’re eating out, or cooking at home, French fries should be on the menu! But how do you make french fries? And what is the best food processor for French fries?

In this blog post, we’ll explore 5 of the top-rated food processors and why they are perfect for preparing delicious french fry recipes.

  1. Cuisinart Custom 14-Cup Food Processor, Brushed Stainless Steel
  2. KitchenAid KFP1466CU 14-Cup Food Processor with Exact Slice System and Dicing Kit
  3. Hamilton Beach Food Processor & Vegetable Chopper for Slicing, Shredding, Mincing, and Puree, 10 Cups – Bowl Scraper, Stainless Steel
  4. Oster Pro 1200 Blender with Professional Tritan Jar and Food Processor attachment
  5. KitchenAid KFP1133ER 11-Cup Food Processor with Exact Slice System
How to Cut French Fries with a Food Processor?

Sharing is caring!

Leave a Comment