I have been using my food processor for years and the blades were starting to get dull, but I didn’t know how or what to do.
Luckily, someone gave me some advice on how to sharpen food processor blades and now they work like new!
- Step One: Clean the blades thoroughly.
- Step Two: Find a sharpening stone or stonecutter blade that is shaped like an oval with one flat side and two cut sides. This type of sharpener should be able to accommodate any size blade – from large slicing blades to tiny grating ones. If you don’t have access to this type, then use whatever other types are available in your kitchen (e.g., knife sharpeners).
- Step Three: Use water as a lubricant for the first few strokes on each side of the food processor’s blades so that they can glide easily over the surface of the stones/sharpener without getting stuck by dried residues such as dough bits, rice grains, and other bits of food debris.
- Step Four: Gently run the blades over the sharpener’s two flat surfaces, one side at a time, until they are smooth again on both sides. If you have to do this process more than once or twice, use fresh water each time for lubrication and/or add some oil as an additional lubricant.
- Step Five: Test the blades for sharpness by slicing a piece of paper with them and then running over one side until it’s totally smooth again.
Do Food Processor Blades need to be Sharpened?
Cutting food requires a sharp blade. If you have an old food processor or notice that your blades are starting to dull, it might be time for a new one.
Do food processor blades need to be sharpened? In most cases, yes they do!
You’ll want to sharpen your food processor blades on a regular schedule. If you have an old machine or just bought one and are noticing that the blades are not as sharp as they could be, then it’s time for some maintenance.
The cutting process requires dulling of the blade to cut properly so there is a need to sharpen them regularly.
You can see how dull the blade has become if you notice that it’s difficult to cut through certain foods or when juices from fruits and vegetables shoot out of the machine while cutting. Once this happens, your blades will have to be sharpened before they are used again for food processing purposes!
Last update on June 26, 2022 / Affiliate links / Images from Amazon Product Advertising API
How often should you Sharpen your Food Processing Blade?
A dull food processing blade can lead to the following:
- Poor quality of cut.
- Increased wear on the machine.
- Lack of control and precision when using the machine.
Therefore, it is important to know how often you should sharpen your food processing blade in order to maintain a high level of performance from your equipment.
Ideally, a sharpening service will be used at least once per year for standard kitchen applications as well as an additional time per year for heavy use or continuous use blades.
What are the consequences for not Sharpening a Food Processor Blade regularly?
There are many consequences for not sharpening a food processor blade regularly.
One of the most obvious ones is that it will lead to an inefficient machine, and you will have more work on your plate as a result. This means that you’ll need to spend more time cooking, which can be frustrating if you’re in a rush or trying to get dinner ready for your family.
Another consequence is that the blades may stop spinning when they come into contact with ingredients, which can cause injuries if someone happens to be nearby at the time. This can also lead to a mess, which is not something that you’ll want if you’re in the middle of cooking.
How to Sharpen Your Food Processor Blades with Eggshells?
It is always a good idea to sharpen your food processor blades with eggshells. It’s an effective and simple way to do so.
– Get a dozen or so eggshells. You can use the shells of eggs you have eaten for this purpose, but it is better to find some from your local farmer’s market!
– Go into the kitchen and grab an eggshell (or two). After cracking open the egg, take off any parts that might be left on like cartilage or membranes.
– Pour out the yolk and white pieces onto a paper towel in order to let them dry completely without getting stuck everywhere.
– Put all of these peeled bits together inside one container with water at room temperature overnight while covered tightly by plastic wrap. This will make sure they are ready when needed!
– Make sure your blades are clean before putting the eggshells on them.
– Put a small amount of water and dish soap into your food processor’s removable blade container, then add the blades themselves to be cleaned.
– Make sure they are completely submerged in fluid before turning it on for about five minutes at medium speed with the lid open so that all parts can dry out evenly!
– Remove the blade from its base by sliding it off after running under cold water for 30 seconds or less (this will make it easier).
– Lay down two pieces of plastic wrap over your work surface, one larger than the other – this is where you’ll lay down both sets of blades once finished sharpening them.
How to Sharpen a Food Processor Blade with Salt?
I had a situation where my food processor blade needed to be sharpened and I didn’t have any stones or other tools on hand. After asking around, someone told me that salt would do the trick. It does! Here’s how it works:
– Place half a cup of salt in the food processor blade.
– Process for about two minutes, scrape off any residue and repeat if necessary.
– Finally, wash thoroughly with warm soapy water and dry to remove any excess salt.
The finished product is an even sharper blade that doesn’t cut extraneous items or process as many times before becoming dull.
Do Ice Cubes Sharpen Food Processor Blades?
We have all heard the rumor that putting your food processor blades in ice cubes will sharpen them. Is this true? In this article, we are going to investigate whether or not this is a myth, and if it can actually help prolong the life of your blades.
We know that the freezer can temporarily sharpen blades, but is putting them in ice cubes even worth it?
The age-old myth seems to have been debunked with a temperature test. Ice melts at 32 degrees Fahrenheit, which will not make your food processor blade any sharper.
Putting an already sharpened blade into cold water might also prove difficult because of how much more brittle metal becomes when it freezes (and expands). This could damage the steel by cracking or breaking off little pieces of material from the edge.
There are small benefits for using frosty ice cubes to clean your food processor blades between uses as well: iced water won’t leave gritty residue behind like soap or dishwashing detergent does! Plus – they’re free to make!
Tip: Adding a little vinegar or lemon juice will help prevent rust and build-up in your blade – use this method if you don’t want to bother with ice cubes.
The Best and Worst Ways to Sharpen Your Ninja Food Processor Blades
Without sharp blades, it’s hard for your Ninja to do much at all. Unfortunately, there is no way to sharpen those blades yourself (at least not that I know of), and they don’t last forever either. So when they start getting dull or damaged from use, what should you do?
The best thing you can do is contact the company and ask for a replacement set of blades. They’re going to want to know specifics about what happened, but they might not always replace it if you accidentally cut yourself or something like that.
The worst thing you can do to keep using your machine as-is! This causes more damage and makes things worse in the long run.
Ninja food processors are really awesome products, but they can be dangerous if not cared for properly!
How Do You Sharpen a Breville Food Processor Blade?
I had an experience on How to sharpen a Breville food processor blade. I have a Breville Sous Chef 12 Cup Food Processor and the blades were getting dull. I was looking for ways to make them sharper but didn’t want to invest in another set of blades if this one wasn’t salvageable.
After doing some research, it turns out that you can actually sharpen the blades with a diamond hone! The process is pretty simple and only takes about 10 minutes per blade.
- I started with the bottom blade first, as I had cleaned and dried it.
- You will need a diamond hone (I used this one ), dish soap or other lubricants, lukewarm water, paper towel to dry blades after sharpening.
- Preheat your oven to 350 degrees Fahrenheit/180 degrees Celsius.
- Put about an inch of warm water in a shallow pan on the stovetop and add some dish soap for lubrication.
- Place each blade in turn into the hot soapy liquid for at least 15 seconds – be careful not to let them touch anything else while immersed! The second they are done soaking you can place them onto a clean section of paper towel until you’re ready to sharpen them.
- Be careful not to overdo it or you might end up shaving off too much metal. You can use multiple hones if necessary.
*Note: Breville’s original instructions came with clear diagrams but I will do my best to explain how I did this project myself.
How To Clean The Food Processor Blade?
Many people are unsure of how to properly clean the blades on their food processor. This blog post outlines in detail, step by step, exactly what you need to do to maintain your appliance and keep it running smoothly.
Cleaning the blade will prevent clogs that can make your food processor work less effectively or even stop working altogether.
- Step One: Remove all of the food from the machine and clean up any spilled flour or other ingredients.
- Step Two: Soak a rag in white vinegar, wring out excess water, then wipe down the blade to remove stuck-on particles. Rinse with warm water.
- Step Three: Pour enough dish soap onto a rag so it is saturated but not dripping wet, then scrub around the blades until they are shiny again. Dish soap can be used instead of vinegar if you prefer that method for cleaning your blades.
- Step Four: If there is still a persistent problem after washing away chemical residue and sticking particles using vinegar or dish soap try adding lemon juice to your next wash cycle because this will help dissolve anything that is stuck on the blade.
- Step Five: Rinse your blades thoroughly to remove any soap residue and then dry with a clean cloth or paper towel.
- Step Six: Replace the food processor lid, insert the blade back into place and turn it clockwise until it clicks in securely.
The Best Way to Store Your Food Processor Blades?
When you buy a new food processor, one of the first things that you will want to do is find a way to store your blades. When storing your blades, there are several different ways that you can choose from. You could use the blade storage compartment in the machine itself, or you could purchase a separate container for them.
Which option is best? We have all of the information here!
- Blades can be stored in the blade storage compartment of a food processor, but there is an issue with this option.
If you have multiple blades for your machine and they are all put into one container or compartment (or even if just some of them are), it will make it hard to retrieve the right one without removing every single blade from that location.
This makes using your machine much more difficult since you may have to go through several tries before finding the correct blade. You might also forget which ones were used on what dishes!
- A second option is purchasing a separate receptacle for each individual blade type or design – such as slicing, grating, spiralizing, etcetera.
This would allow you to store exactly what you need without opening up a drawer or container to find it.
This also makes the process of using your machine much easier because you don’t have to remove every blade each time just for selecting one.
However, this option may be more expensive and difficult to clean if food gets stuck in between the blades
- If you are on a budget but still want some way of storing all those blades, another solution is purchasing different containers with separate compartments that can easily fit into one kitchen drawer.
They will help keep things organized so that finding what you need becomes quick and easy!
The Best Food Processor Blades
Having the right food processor blades can be the difference between a good and bad meal. When you are looking for new blades, you should consider how often you will use your machine, what types of foods you will be chopping up, as well as whether or not there are any other attachments that might come in handy.
- The most common blade: S-shaped blades
- For creating straw-like cuts: Julienne blades
- Great for pureeing: Serrated blades
- Ideal for slicing: Slicing blades
- For creating liquid-based dishes: Perforated blades
- The ideal choices for cutting any type of cheese: Shredding & grating blades
- Looking for precise dices: Dicing blades
- Cut thin or thick french fry shapes: French fry blades
- Serve to create textures: Whipping disc blades
- To create super small dices: Brunoise blades
- To create waffle fries, potato chips: Gaufrette blades
A food processor can improve your life surprisingly in just 5 ways!! To know more, Click Here.